COATINGS & INKS
Additives, pigments and functional fillers engineered at the point where a formulation is still wet — where wetting, flow, density and cure all get decided.
THE BRIEF
Formulation science, not commodity supply.
Every coating and ink is a balancing act — opacity against cost, flow against sag, adhesion against flexibility, weight against strength. We supply the eight additive classes that formulators reach for first when one side of that balance needs correcting, backed by lab support and batch-level consistency.
From architectural paints to industrial primers, wood finishes, printing inks and protective coatings — our range covers the film from the moment it's wet in the can to the moment it's a cured, functional surface.
0
Product FamiliesWB/SB
Both Chemistries Covered<24h
Technical Data TurnaroundISO
Batch-Tested ConsistencyEight additives. Every one earns its place in the can.
Each panel below is read like a drawdown card — the same way these materials are judged on a lab bench: by function, by system compatibility, and by what they do to the film.
Anti-Microbial Additive (Dry Film)
Protects the cured film from bacteria, mould and algae over its service life — keeping architectural and industrial coatings hygienic and stain-free long after application.
Defoamers
Knocks down entrained air during high-speed dispersion and application, preventing pinholes, cratering and foam-related defects across waterborne and solventborne systems.
Hollow Glass Microspheres
Lightweight, low-density spheres that cut formulation weight, add insulating value and reduce shrinkage in coatings, syntactic foams and putties.
Ceramic Microspheres
Dense, spherical fillers that raise hardness, thermal resistance and mechanical strength — improving abrasion resistance in high-performance coating systems.
Buff TiO2
High-opacity titanium dioxide engineered for consistent tint strength, brightness and hiding power across architectural, industrial and decorative coatings.
Wetting & Levelling Additive
Lowers surface tension for even pigment and substrate wetting, promoting smooth flow-out and eliminating brush marks, craters and orange peel.
Milled Glass Fibers
Short, milled reinforcement fibers that raise tensile strength, crack resistance and dimensional stability in coatings, composites and industrial flooring.
Adhesion Promoters (Water & Solvent Base)
Improves inter-coat and substrate adhesion on difficult surfaces like plastics and metals — available in both waterborne and solventborne chemistries.
One additive bench, six end markets.
Architectural & Decorative Paints
Industrial & Protective Coatings
Printing & Packaging Inks
Wood & Metal Finishes
Marine Coatings
Automotive Coatings
Need Our Services?
Call: +91 97695 93030
Work Hours
Mon – Sat: 9:00 AM – 6:00 PM IST
Email Us
support@geoconproducts.com